Filter
Top Products
• Coupled command: No
• Related Commands: *EMC, *GMC, *LMC, *RMC
• *RST Condition: none; macro definitions are unaffected
• Power-On Condition: no macros are defined
Example Define macro to start measurement
*DMC " RESTART","ABOR;INIT" Define macro
*EMC and *EMC?
*EMC <enable> enables and disables macro usage. When enable is zero, macros
usage is disabled. Any non-zero value enables macro usage.
The query form returns 1 if macro usage is enabled, 0 if disabled.
Comments • Macro definitions are not affected by this command.
• Executable when initiated: Yes
• Coupled command: No
• *RST Condition: macro usage is disabled
• Power-On Condition: macro usage is enabled
*ESE and *ESE?
*ESE <mask> enables one or more event bits of the Standard Event Status Register
to be reported in bit 5 (the Standard Event Status Summary Bit) of the Status Byte
Register. Mask is the sum of the decimal weights of the bits to be enabled.
The query form returns the current enable mask.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
mask
numeric 0 through 255 none
A 1 in a bit position enables the corresponding event; a 0 disables it.
Comments • Executable when initiated: Yes
*EMC and *EMC?
Chapter 4 Command Reference 300