HP (Hewlett-Packard) B Network Router User Manual


 
:OPERation|:QUEStionable:NTRansition
STATus:OPERation|:QUEStionable:NTRansition <unmask > sets the negative
transition mask. For each bit unmasked, a 1-to-0 transition of that bit in the
associated condition register will set the same bit in the associated event register.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
unmask
numeric or
non-decimal
numeric
0 through +32767 none
The non-decimal numeric forms are the #H, #Q, or #B formats specified by
IEEE-488.2.
Comments Executable when initiated: Yes
Coupled command: No
Related commands: STATus subsystem, *SRE, *STB?
*RST Condition: unaffected
Power-on Condition: STATUS:OPERation|QUEStionable:NTRansition 0
Example Setting the Operation register negative transition mask
STAT:OPER:NTR 64 Set event bit when wait-for-arm state is
entered
:OPERation|:QUEStionable:PTRansition
STATus:OPERation|:QUEStionable:PTRansition <unmask > sets the positive
transition mask. For each bit unmasked, a 0-to-1 transition of that bit in the
associated condition register will set the same bit in the associated event register.
STATus:OPERation|:QUEStionable:NTRansition
STATus Subsystem Command Reference 269