Filter
Top Products
/* use the "memory" array to configure the memory card */
char static *memory[] =
{"FORM:DATA PACK", /* set packed data format */
"TRAC:DEL:ALL", /* delete all readings on memory card */
"TRAC:DEF SET1, 80", /* store readings (80 bytes) in "SET1" */
"VINS:LBUS:RES", /* reset the Local bus chip */
"VINS:LBUS:MODE CONS", /* set Local bus mode to consume */
"STAT:OPC:INIT OFF"}; /* execute *OPC? after INIT is parsed */
/* Execute each command in "digitizer1" using a loop */
length = (sizeof(digitizer1) / sizeof(char*));
for (loop = 0; loop < length; loop++)
{
IOOUTPUTS(ADDR_G, digitizer1[loop], strlen(digitizer1[loop]));
}
/* Execute each command in "digitizer2" using a loop */
length = (sizeof(digitizer2) / sizeof(char*));
for (loop = 0; loop < length; loop++)
{
IOOUTPUTS(ADDR_I, digitizer2[loop], strlen(digitizer2[loop]));
}
/* Execute each command in "memory" */
length = (sizeof(memory) / sizeof(char*));
for (loop = 0; loop < length; loop++)
{
IOOUTPUTS(ADDR_MEM, memory[loop], strlen(memory[loop]));
}
/* check for digitizer and memory card configuration errors */
check_error("digitizer1", ADDR_G);
check_error("digitizer2", ADDR_I);
check_error("memory", ADDR_MEM);
}
Continued on Next Page
410 Local Bus Interleaved Transfers Appendix D