Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
unmask
numeric or
non-decimal
numeric
0 through +32767 none
The non-decimal numeric forms are the #H, #Q, or #B formats specified by
IEEE-488.2.
Comments • Executable when initiated: Yes
• Coupled command: No
• Related commands: STATus subsystem, *SRE, *STB?
• *RST Condition: unaffected
• Power-on Condition: STATUS:OPERation|QUEStionable:PTRansition 32767
Example Setting the Operation register positive transition mask
STAT:OPER:PTR 64 Set event bit when wait-for-arm state is
entered
:PRESet
STATus:PRESet initializes the enable registers and transition masks for the
Operation and Questionable Signal status registers and sets STATus:OPC:INITiate
ON. For both status registers, the enable registers are set to 0, the negative
transition masks are set to 0, and the positive transition masks are set to 32767.
Comments • Executable when initiated: Yes
• Coupled command: No
• Related commands: STATus subsystem, *SRE, *STB?
• *RST Condition: none
Example Presetting the STATus subsystem
STAT:PRES Preset STATus subsystem
STATus:PRESet
270 Command Reference STATus Subsystem