Filter
Top Products
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
n
decimal 1|2 none
source
discrete BUS|ECLTrg0|
ECLTrg1|IMMediate|
EXTernal1|INTernal[1]|
INTernal2|HOLD
TTLTrg0 to TTLTrg7
none
Choice IMMediate is only available for ARM:STARt:SOURce1.
Comments • Executable when initiated: No
• Coupled Command: Yes. The command is coupled to the
ARM[:STARt]:SLOPe[<n >], ARM[:STARt]:LEVel:NEGative, and
ARM[:STARt]:LEVel:POSitive commands.
• The active edge for the EXTernal1 source is specified by the
ARM:STARt:SLOPe[<n >] command.
• The active edge(s) for level detection (ARM:STARt:SOUR:LEVel<chan >) is
specified by the ARM:STARt:SLOPe[<n >] command.
• Related Commands: ARM:STARt:SLOPe[<n >],
ARM:STARt:LEVel[<chan >]
• *RST Condition: ARM:STARt:SOURce1 IMMediate, ARM:STARt:SOURce2
HOLD
Example Setting two arm start sources
ARM:SOUR1 EXT1 Set one arming source to be the front panel
"Ext 1" BNC.
ARM:SOUR2 ECLT0 Set the second arming source to be the
ECLTRG line.
ARM[:STARt]:SOURce[<
n
>]
ARM Subsystem Command Reference 197