Filter
Top Products
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
chan
numeric 1 | 2 none
size
numeric 1 | 7 to 524288 none
expected
value
numeric -102.30 to 102.35 |
DEFault |
MINimum | MAXimum
volts
resolution
numeric .00005 to .05 |
DEFault |
MINimum | MAXimum
volts
input port
numeric 1|3 with MEASure1
2|4 with MEASure2
1 and 2 are single ended
3 and 4 are differential
none
The maximum size parameter will be 524284 if the battery is
enabled instead of 524288.
For expected value, MINimum selects the 0.100 V range and
MAXimum selects either the 1.0 volt range (single ended ports)
or the 100 V range (differential ports). DEFault selects 1V.
For resolution, MINimum, MAXimum, and DEFault select the
same value.
Settings Maximum expected value settings per range are shown in the following table, along
with the resolution associated with each range. The highlighted area shows the
setting used when the expected value is not specified or DEFault is used.
MEASure[<
chan
>]:ARRay[:VOLTage][:DC]?
MEASure[<
chan
>] Subsystem Command Reference 237