Filter
Top Products
Number of
Memory Segments
Maximum Number
of Readings
1 524,288
2 262,144
4 131,072
8 65,536
16 32,768
32 16,384
64 8,192
128 4,096
NOTE: If the non-volatile mode of memory is enabled then the maximum
number of readings for each memory partition decreases by four. These four
memory locations in each segment hold the data necessary to recover all
readings after a power failure.
Subsystem
Syntax
[SENSe[<
chan
>]]
:SWEep
:OFFSet
:POINts <
count
>
:POINts <
count
>
:OFFSet:POINts <
count
>
[SENSe[<chan>]]:SWEep:OFFSet:POINts <count> specifies how many pre-arm
readings will be taken. When pre-arm readings are not 0, then there must always be
at least 7 post-arm readings taken. Note that count is specified as a negative number.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
chan
numeric 1|2 none
count
numeric -65535 to -3 | 0 |
MINimum | MAXimum
none
MINimum and MAXimum vary depending on
ARM:STARt:COUNt and SENSe:SWEep:POINts.
[SENSe[<
chan
>]]:SWEep:OFFSet:POINts <
count
>
258 Command Reference [SENSe[<
chan
>]]:SWEep Subsystem