Filter
Top Products
Code Message Description
-101 Invalid character Unrecognized character in parameter.
-102 Syntax error Command is missing a space or comma between
parameters.
-103 Invalid separator Parameter is separated by a character other than a
comma.
-104 Data type error The wrong data type (number, character, string,
expression) was used when specifying the parameter.
-105 GET not allowed An HP-IB Group Execute Trigger was included in a
command string sent to the digitizer.
-108 Parameter not allowed More parameters were received than expected for the
command header.
-109 Missing parameter Command requires a parameter or parameters.
-112 Program mnemonic too long Command keyword >12 characters
-113 Undefined header Command header (keyword) was incorrectly specified.
-121 Invalid character in number A character other than a comma or number is in the
middle of a number.
-123 Exponent too large The magnitude of the exponent was larger than
32000.
-124 Too many digits More than 255 digits were used to specify a number.
-128 Numeric data not allowed A number was specified when a letter was required.
-131 Invalid suffix Parameter suffix incorrectly specified (e.g. 10 MZ
rather than 10 MHZ).
-138 Suffix not allowed Parameter suffix is specifed when one is not allowed.
-141 Invalid character data Discrete parameter specified is not a valid choice.
-144 Character data too long A character data type parameter is >12 characters.
-148 Character data not allowed Discrete parameter was specified when another type
(e.g. numeric, boolean) is required.
-151 Invalid string data The string data specified (such as for the
OUTPut:ECLTrg:FEED <source>command) is not a
valid choice.
-158 String data not allowed A string was specified when another parameter type
(i.e. discrete, numeric, boolean) is required.
Table B-3. HP E1429A/B Error Messages
336 Useful Tables Appendix B