HP (Hewlett-Packard) B Network Router User Manual


 
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
mode
discrete GENerate|OFF none
Comments Executable when initiated: No
Coupled command: Yes, VINStrument:CONFigure:VME:MODE GENerate is
not allowed unless VINStrument:CONFigure:LBUS:MODE is set to OFF or
PIPeline.
Related Commands: VINStrument:CONFigure:VME:FEED
*RST Condition: VINStrument:CONFigure:VME:MODE OFF
Example Setting the VXIbus data transfer bus operation mode
VINS:VME GEN Set GENerate mode
[:CONFigure]:VME:SEND:ADDRess:DATA?
VINStrument[:CONFigure]:VME:SEND:ADDRess:DATA? returns two values:
A24,12. A24 indicates that the HP E1429’s A24 address space should be used for
reading measurement data, and 12 (0C
16
) is the offset of the data register in A24
address space.
Comments Executable when initiated: Yes
Coupled command: No
Related Commands: VINStrument:CONFigure:VME:MODE,
TRIGger:STARt:SOURce, VINStrument:CONFigure:VME:MEMory:INITiate
*RST Condition: A24,12
Example Querying the A24 address space offset
VINS:VME:SEND:ADDR:DATA? Query A24 offset for data reads
VINStrument[:CONFigure]:VME:SEND:ADDRess:DATA?
296 Command Reference VINStrument Subsystem