Filter
Top Products
*TST?
*TST? causes the HP E1429 to execute its internal self-test and return a value
indicating the results of the test.
A zero (0) response indicates that the self-test passed. A one (1) response indicates
that the test failed. A failure also generates an error message with information on
why the test failed. Additional information on the failure is provided by the
DIAGnostic:TEST? command.
When the test completes, all commands are set to their *RST values.
Caution Executing the self-test using *TST? erases all data in the digitizer’s
non-volatile memory.
Comments • Executable when initiated: No
• Coupled command: No
• *RST Condition: none
*WAI
*WAI causes the HP E1429 to wait for all pending operations to complete before
executing any further commands.
If STATus:OPC:INITiate OFF is set, command execution resumes when all
commands received prior to *WAI have been executed. If ON is set, *WAI waits
for the digitizer to return to the idle state before resuming command execution.
Comments • Executable when initiated: Yes
• Coupled command: No
• Related commands: *OPC, *OPC?
• *RST Condition: none
*TST?
309 Command Reference Chapter 4