Filter
Top Products
HP E1429A/B
VXIbus
Configuration
Table 1-1 lists the digitizer’s VXIbus device information and factory
settings. Appendix A has the complete list of HP E1429A/B operating
specifications.
Input signals (DC and AC) which may be connected to this module are
likely to include occasional overvoltage transients. These
overvoltages may be caused by motor inductances, switching circuits,
lightning, etc.
If the input signal is likely to exhibit transients greater than 800 Vpk,
add external transient suppression circuitry to reduce transients to
800 Vpk or less.
VXIbus Device Information
Device type: message-based servant
C-size (1 slot)
Connectors: P1 and P2
Addressing modes: A16/A24
Data transfer modes: D08/D16/D32 slave
A24 size: 4096 bytes
Dynamically Configurable
Non-interrupter/non-interrupt handler
VXIbus Revision Compliance: 1.4
SCPI Revision: 1992.0
See side of module for power/cooling requirements
HP E1429A/B Factory Settings
Parameter Setting
Logical Address 40
Servant Area 0 (not used)
Bus Request Level 3
Table 1-1. HP E1429A/B VXIbus Configuration
Chapter 1 Gettin
g
Started 15