Filter
Top Products
Comments • Executable when initiated: Yes
• Coupled Command: No
• The specified address is assumed to be relative to the local processor and is not
the A24 offset, but is instead the full address (i.e. E0000C
16
would specify the
data register, as opposed to the VME A24 offset of C
16
).
Example Examining the setting of the traffic register
DIAG:PEEK? #HE00002,8 Retrieve the contents of the 8 bit traffic
register
:POKE
DIAGnostic:POKE <address, bits, value> places the specified value into the
memory location specified.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
address
numeric 0 thru FFFFFF
16
none
bits
numeric 8 | 16 | 32 none
value
numeric -2147483648 thru
2147483647
none
Comments • Executable when initiated: Yes
• Coupled Command: No
• The specified address is assumed to be relative to the local processor and is not
the A24 offset, but is instead the full address (i.e. E0000C
16
would specify the
data register, as opposed to the VME A24 offset of C
16
).
Example Changing the contents of the traffic register
DIAG:POKE #HE00002,8,#H4B Set traffic register to value of 4B hex
DIAGnostic:POKE
222 Command Reference DIAGnostic Subsystem