Filter
Top Products
Note When shipped from the factory, the protected user data area contains information
regarding when the HP E1429 was last calibrated.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
mask
block
data
or
string
0 through 63 characters none
Comments • Executable when initiated: Yes
• Coupled command: No
• *RST Condition: unaffected
• Power-On Condition: unaffected
Example Setting the protected user data
*PUD #17Unit #5 Set data to “Unit #5"
*RCL
*RCL <number> restores a previously stored programming state from one of the 10
possible stored state areas. Number indicates which of the stored state areas should
be used.
This command affects the same command settings as does *RST. Notable
exceptions include MEMory:BATTery:STATe, the STATus subsystem commands,
and the CALibration:SECurity command state.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
number
numeric 0 through 9 none
Comments • Executable when initiated: No
• Coupled command: No
• Related Commands: *LRN?, *RST, *SAV
*RCL
305 Command Reference Chapter 4