Filter
Top Products
:STORe
CALibration[<chan >]:STORe stores the current calibration constants into
non-volatile calibration memory.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
chan
numeric 1 or 2 none
Comments • Executable when initiated: No
• Coupled Command: No
• CALibration:SECure:STATe must be OFF before executing this command.
• Related commands: CALibration[<chan>]:DATA,
CALibration:SECure:STATe, CALibration:COUNt?, CALibration:STORe:AUTO
• *RST Condition: none
Example Sending and storing an array of new cal constants
ASSIGN @X TO 70905;FORMAT OFF
Turn format off for array data
OUTPUT 70905 USING "#,K";"CAL:DATA #3124"
Specify 124 bytes coming (62
constants)
OUTPUT @X;Array(*),CHR$(10),END Send the array of calibration constants
OUTPUT 70905;"CAL:SEC:OFF,E1429"
Disable security
OUTPUT 70905;"CAL:STOR" Store the calibration data in non-volatile
RAM
CALibration[<
chan
>]:STORe
CALibration[<
chan
>] Subsystem Command Reference 207