Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-62
v1.0, November 2010
set gvrp interfacemode
This command enables GVRP on a single port (Interface Config mode) or all ports (Global Config
mode).
no set gvrp interfacemode
This command disables GVRP on a single port (Interface Config mode) or all ports (Global Config
mode). If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.
show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or
all interfaces.
Default disabled
Format set gvrp interfacemode
Mode • Interface Config
• Global Config
Format no set gvrp interfacemode
Mode • Interface Config
• Global Config
Format show gvrp configuration {<unit/slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface Valid slot and port number separated by forward slashes.
Join Timer The interval between the transmission of GARP PDUs registering (or re-registering)
membership for an attribute. Current attributes are a VLAN or multicast group. There is
an instance of this timer on a per-Port, per-GARP participant basis. Permissible values
are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds
(0.2 seconds). The finest granularity of specification is one centisecond (0.01 seconds).