Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Stacking Commands 2-7
v1.0, November 2010
If you supply a value for <unit/slot>, the following additional information appears:
show supported cardtype
This commands displays information about all card types or specific card types supported in the
system.
If you do not supply a value for <cardindex>, the following output appears:
Term Definition
Slot The slot identifier in a <unit/slot> format.
Slot Status The slot is empty, full, or has encountered an error
Admin State The slot administrative mode is enabled or disabled.
Power State The slot power mode is enabled or disabled.
Configured Card
Model Identifier
The model identifier of the card preconfigured in the slot. Model Identifier is a 32-
character field used to identify a card.
Pluggable Cards are pluggable or non-pluggable in the slot.
Power Down Indicates whether the slot can be powered down.
Term Definition
Inserted Card
Model Identifier
The model identifier of the card inserted in the slot. Model Identifier is a 32-character
field used to identify a card. This field is displayed only if the slot is full.
Inserted Card
Description
The card description. This field is displayed only if the slot is full.
Configured Card
Description
The card description of the card preconfigured in the slot.
Format show supported cardtype [<cardindex>]
Mode User EXEC
Term Definition
Card Index (CID) The index into the database of the supported card types. This index is used when
preconfiguring a slot.
Card Model
Identifier
The model identifier for the supported card type.