Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-63
v1.0, November 2010
Text-based configuration supports Radius server’s secrets in encrypted and non-encrypted format.
When you save the configuration, these secret keys are stored in encrypted format only. If you
want to enter the key in encrypted format, enter the key along with the encrypted keyword. In the
show running config command’s display, these secret keys are displayed in encrypted format. You
cannot show these keys in plain text format.
The following shows an example of the CLI command.
radius server key acct 10.240.4.10 encrypted <encrypt-string>
radius server msgauth
This command enables the message authenticator attribute to be used for the specified RADIUS
Authenticating server.
Note: The secret must be an alphanumeric value not exceeding 16 characters.
Format radius server key {auth | acct} {<ipaddr|dnsname>} encrypted
<password>
Mode Global Config
Field Description
ipaddr The IP address of the server.
dnsname The DNS name of the server.
password The password in encrypted format.
Format radius server msgauth <ipaddr|dnsname>
Mode Global Config
Field Description
ip addr The IP address of the server.
dnsname The DNS name of the server.