Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-167
v1.0, November 2010
show lldp statistics
Use this command to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
The table contains the following column headings:
Format show lldp statistics {<unit/slot/port> | all}
Mode Privileged Exec
Term Definition
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and
seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts Total number of times a complete remote data entry was deleted because the Time to
Live interval expired.
Term Definition
Interface The interface in unit/slot/port format.
Transmit Total Total number of LLDP packets transmitted on the port.
Receive Total Total number of LLDP packets received on the port.
Discards Total number of LLDP frames discarded on the port for any reason.
Errors The number of invalid LLDP frames received on the port.
Ageouts Total number of times a complete remote data entry was deleted for the port because the
Time to Live interval expired.
TLV Discards The number of TLVs discarded.
TLV Unknowns Total number of LLDP TLVs received on the port where the type value is in the reserved
range, and not recognized.
TLV MED Total number of LLDP MED TLVs received on the local ports.
TVL802.1 Total number of 802.1 LLDP TLVs received on the local ports.
TVL802.3 Total number of 802.3 LLDP TLVs received on the local ports.