Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-48
v1.0, November 2010
no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. Low-address and high-
address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to
a pool address as part of a ping operation. By default the number of packets sent to a pool address
is 2, which is the smallest allowed number when sending packets. Setting the number of packets to
0 disables this command.
no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of packets to
0.
Format ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config
Format no ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config
Default 2
Format ip dhcp ping packets <0,2-10>
Mode Global Config
Default 0
Format no ip dhcp ping packets
Mode Global Config