Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Routing Commands 4-13
v1.0, November 2010
no ip mtu
This command resets the ip mtu to the default value.
encapsulation
This command configures the link layer encapsulation type for the packet. The encapsulation type
can be ethernet or snap.
clear ip route all
This command removes all the route entries learned over the network.
show ip brief
This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
Format no ip mtu <mtu>
Mode Interface Config
Default ethernet
Format encapsulation {ethernet | snap}
Mode Interface Config
Note: Routed frames are always ethernet encapsulated when a frame is routed to a
VLAN.
Format clear ip route all
Mode Privileged EXEC
Protocol Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
Total Number
of Routes
The total number of routes.