Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-23
v1.0, November 2010
no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy. <classname> is the names of an existing DiffServ class.
mark cos
This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header (the only tag in a single tagged packet or the
first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain
this header, one is inserted. The CoS value is an integer from 0 to 7.mark ip-dscp
mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP
value.
The <dscpval> value is specified as either an integer from 0 to 63, or symbolically through one
of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be,
cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
Note: This command removes the reference to the class definition for the specified policy.
Format no class <classname>
Mode Policy-Map Config
Default 1
Format mark-cos <0-7>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark IP DSCP, IP Precedence, Police
Format mark ip-dscp <dscpval>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark CoS, Mark IP Precedence, Police