Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-9
v1.0, November 2010
The display parameters, when the argument is <unit/slot/port>, are as follows:
The display parameters, when the argument is “switchport” are as follows:
Parameters Definition
Packets
Received
Without Error
The total number of packets (including broadcast packets and multicast packets) received
by the processor.
Packets
Received With
Error
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
Broadcast
Packets
Received
The total number of packets received that were directed to the broadcast address. Note
that this does not include multicast packets.
Packets
Transmitted
Without Error
The total number of packets transmitted out of the interface.
Transmit
Packets Errors
The number of outbound packets that could not be transmitted because of errors.
Collisions
Frames
The best estimate of the total number of collisions on this Ethernet segment.
Time Since
Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port
were last cleared.
Term Definition
Packets
Received
Without Error
The total number of packets (including broadcast packets and multicast packets) received
by the processor.
Broadcast
Packets
Received
The total number of packets received that were directed to the broadcast address. Note
that this does not include multicast packets.
Packets
Received With
Error
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
Packets
Transmitted
Without Error
The total number of packets transmitted out of the interface.
Broadcast
Packets
Transmitted
The total number of packets that higher-level protocols requested to be transmitted to the
Broadcast address, including those that were discarded or not sent.
Transmit Packet
Errors
The number of outbound packets that could not be transmitted because of errors.