Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-141
v1.0, November 2010
show ip arp inspection interfaces
Use this command to display the Dynamic ARP Inspection configuration on all the DAI-enabled
interfaces. An interface is said to be enabled for DAI if at least one VLAN, that the interface is a
member of, is enabled for DAI. Given a unit/slot/port interface argument, the command displays
the values for that interface whether the interface is enabled for DAI or not.
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
--------------- ----------- ---------- ---------------
0/1 Untrusted 15 1
0/2 Untrusted 10 10
show arp access-list
Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL name
as the argument will display only the rules in that ARP ACL.
Default none
Format clear ip arp inspection statistics
Mode Privileged EXEC
Format show ip arp inspection interfaces [unit/slot/port]
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The interface ID for each displayed row.
Trust State Whether the interface is trusted or untrusted for DAI.
Rate Limit The configured rate limit value in packets per second.
Burst Interval The configured burst interval value in seconds.