Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-23
v1.0, November 2010
logging persistent
Use this command to configure the Persistent logging for the switch. The severity level of logging
messages is specified at severity level. Possible values for severity level are (emergency|0,
alert|1, critical|2, error|3, warning|4, notice|5, info|6,
debug|7).
no logging persistent
Use this command to disable the persistent logging in the switch.
System Utility and Clear Commands
This section describes the commands you use to help troubleshoot connectivity issues and to
restore various configurations to their factory defaults.
Term Definition
Number of Traps
Since Last Reset
The number of traps since the last boot.
Trap Log
Capacity
The number of traps the system can retain.
Number of Traps
Since Log Last
Viewed
The number of new traps since the command was last executed.
Log The log number.
System Time Up How long the system had been running at the time the trap was sent.
Trap The text of the trap message.
Default Disable
Format logging persistent <severity level>
Mode Global Config
Format no logging persistent
Mode Global Config