Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Stacking Commands 2-9
v1.0, November 2010
When you specify a value for <unit>, the following information appears:
show supported switchtype
This commands displays information about all supported switch types or a specific switch type.
Term Definition
Management
Status
Indicates whether the switch is the Primary Management Unit, a stack member, or the
status is unassigned.
Hardware
Management
Preference
The hardware management preference of the switch. The hardware management
preference can be disabled or unassigned.
Admin
Management
Preference
The administrative management preference value assigned to the switch. This
preference value indicates how likely the switch is to be chosen as the Primary
Management Unit.
Switch Type The 32-bit numeric switch type.
Model Identifier The model identifier for this switch. Model Identifier is a 32-character field assigned by
the device manufacturer to identify the device.
Switch Status The switch status. Possible values are OK, Unsupported, Code Mismatch, Config
Mismatch, or Not Present.
Switch
Description
The switch description.
Expected Code
Version
The expected code version.
Detected Code
Version
The version of code running on this switch. If the switch is not present and the data is
from pre-configuration, then the code version is “None”.
Detected Code in
Flash
The version of code that is currently stored in FLASH memory on the switch. This code
executes after the switch is reset. If the switch is not present and the data is from pre-
configuration, then the code version is “None”.
Up Time The system up time.
Format show supported switchtype [<switchindex>]
Mode User EXEC
Privileged EXEC