Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-11
v1.0, November 2010
diffserv
This command sets the DiffServ operational mode to active. While disabled, the DiffServ
configuration is retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated.
no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ
configuration is retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated.
DiffServ Class Commands
Use the DiffServ class commands to define traffic classification. To classify traffic, you specify
Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes of traffic (name, match
criteria)
This set of commands consists of class creation/deletion and matching, with the class match
commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria are
also known as class rules, with a class definition consisting of one or more rules to identify the
traffic that belongs to the class.
The CLI command root is class-map.
Format diffserv
Mode Global Config
Format no diffserv
Mode Global Config
Note: Once you create a class match criterion for a class, you cannot change or delete the
criterion. To change or delete a class match criterion, you must delete and re-create
the entire class.