Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-42
v1.0, November 2010
vlan pvid
This command changes the VLAN ID per interface.
no vlan pvid
This command sets the VLAN ID per interface to 1.
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The vlan-list contains VlanId's in range <1-4093>. Separate non-
consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range.
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The vlan-list contains VlanId's in
range <1-4093>. Separate non-consecutive IDs with ',' and no spaces and no zeros in between the
range; Use '-' for range.
Default 1
Format vlan pvid <1-4093>
Mode Interface Config
Format no vlan pvid
Mode Interface Config
Format vlan tagging <vlan-list>
Mode Interface Config
Format no vlan tagging <vlan-list>
Mode Interface Config