Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Log Messages 8-16
v1.0, November 2010
QoS
Table 8-33: Protocol-based VLANs Log Messages
Component Message Cause
Protocol Based
VLANs
pbVlanCnfgrInitPhase2Process: Unable to
register NIM callback
Appears when nimRegisterIntfChange fails
to register pbVlan for link state changes.
Protocol Based
VLANs
pbVlanCnfgrInitPhase2Process: Unable to
register pbVlan callback with vlans
Appears when vlanRegisterForChange fails
to register pbVlan for vlan changes.
Protocol Based
VLANs
pbVlanCnfgrInitPhase2Process: Unable to
register pbVlan callback with nvStore
Appears when nvStoreRegister fails to
register save and restore functions for
configuration save.
Table 8-34: ACL Log Messages
Component Message Cause
ACL Total number of ACL rules (x) exceeds max
(y) on intf i.
The combination of all ACLs applied to an
interface has resulted in requiring more rules
than the platform supports.
ACL ACL name, rule x: This rule is not being
logged
The ACL configuration has resulted in a
requirement for more logging rules than the
platform supports. The specified rule is
functioning normally except for the logging
action.
ACL aclLogTask: error logging ACL rule trap for
correlator number
The system was unable to send an SNMP
trap for this ACL rule which contains a
logging attribute.
ACL IP ACL number: Forced truncation of one or
more rules during config migration
While processing the saved configuration,
the system encountered an ACL with more
rules than is supported by the current
version. This may happen when code is
updated to a version supporting fewer rules
per ACL than the previous version.