Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-45
v1.0, November 2010
no bootfile
This command deletes the boot image name.
domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies the
domain name string of the client.
no domain-name
This command removes the domain name.
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that
are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command line.
Servers are listed in order of preference (address1 is the most preferred server, address2 is the next
most preferred server, and so on).
Format no bootfile
Mode DHCP Pool Config
Default none
Format domain-name <domain>
Mode DHCP Pool Config
Format no domain-name
Mode DHCP Pool Config
Default none
Format netbios-name-server <address> [<address2>...<address8>]
Mode DHCP Pool Config