NETGEAR XSM7224S-100NAS Switch User Manual


 
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-29
v1.0, November 2010
show policy-map
This command displays all configuration information for the specified policy. The
<policyname> is the name of an existing DiffServ policy.
If the Policy Name is specified the following fields are displayed:
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Policy Table Size
Current /Max
The current number of entries (rows) and the maximum allowed entries (rows) in
the Policy Table.
Policy Instance Table
Size Current /Max
Current number of entries (rows)
and the maximum allowed entries (rows) in
the Policy Instance Table.
Policy Attribute Table
Size Current /Max
Current number of entries (rows) and the maximum allowed entries (rows) in the
Policy Attribute Table.
Service Table Size
Current /Max
The current number of entries (rows) i and the maximum allowed entries (rows) in
the Service Table.
Format show policy-map [policyname]
Mode Privileged EXEC
Term Definition
Policy Name The name of this policy.
Policy Type The policy type (Only inbound policy definitions are supported for this platform.)
Term Definition
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to
the class.
Class Name The name of this class.
Committed Burst
Size (KB)
The committed burst size, used in simple policing.
Committed Rate
(Kbps)
The committed rate, used in simple policing,
Conform Action The current setting for the action taken on a packet considered to conform to the policing
parameters. This is not displayed if policing is not in use for the class under this policy.
Term Definition