Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-61
v1.0, November 2010
no capture receive packet
This command disables the capturing of receive packets.
capture all packets
This command enables the capturing of receive packets.
no capture all packets
This command disables the capturing of all packets.
capture wrap
This command enables the Buffer Wrapping configuration. Once the capture buffer is full, writes
to the buffer will wrap around to allow continuous packet capture.
show capture packets
This command displays packets being captured from the buffer. The output of the show command
can be redirected to a text file. The resultant text file can be fed to the text2pcap utility or the
Ethereal public domain packet analyzer, which can then be translated to a cap file.
Format no capture receive packet
Mode Global Config
Format capture all packet
Mode Global Config
Format no capture all packets
Mode Global Config
Format capture wrap
Mode Global Config
Default Enabled
Format show capture packets