Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-23
v1.0, November 2010
ip http authentication
This command specifies the authentication methods for http server users. The additional methods
of authentication are used only if the previous method returns an error, not if it fails. To ensure that
the authentication succeeds even if all methods return an error, specify none as the final method in
the command line. For example If none specified as an authentication method after radius, no
authentication is used if the radius server is down.
no ip http authentication
This command restores the authentication methods to the default.
ip http session maxsessions
This command limits the number of allowable un-secure HTTP sessions. Zero is the configurable
minimum.
Format ip http authentication method1 [method2 ...]
Mode Global ConfigC
Term Definition
Local Uses the local username database for authentication.
Radius Uses the list of all RADIUS servers for authentication.
Tacacs Uses the list of all TACACS servers for authentication.
None Uses no authentication.
Format no ip http authentication method1 [method2 ...]
Mode Global Config
Default 16
Format ip http session maxsessions <0-16>
Mode Privileged EXEC