Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-111
v1.0, November 2010
no port-channel load-balance
This command reverts to the default load balancing configuration.
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port
for a configured port-channel, and <name> is an alphanumeric string up to 15 characters.
3 Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet
4 Source IP and Source TCP/UDP fields of the packet
5 Destination IP and Destination TCP/UDP Port fields of the packet
6 Source/Destination IP and source/destination TCP/UDP Port fields of the packet
7 Enhanced Hashing Mode
<unit/slot/
port>| all
Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-
channel. "All" applies the command to all currently configured port-channels.
Format no port-channel load-balance {<unit/slot/port> | <all>}
Mode Interface Config
Global Config
Term Definition
<unit/slot/
port>| all
Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-
channel. "All" applies the command to all currently configured port-channels.
Format port-channel name {<logical unit/slot/port> | all | <name>}
Mode Global Config
Term Definition