Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Routing Commands 4-25
v1.0, November 2010
ip helper-address
Use this command to add a unicast helper address to the list of helper addresses on an interface.
This is the address of a DHCP server. This command can be applied multiple times on the routing
interface to form the helper addresses list until the list reaches the maximum supported helper
addresses.
no ip helper-address
Use this command to remove the IP address from the previously configured list. The no command
without an <
ip-address> argument removes the entire list of helper addresses on that interface.
ip helper-address discard
Use this command to drop matching packets.
Format no ip helper-address {<ip-address>}
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode GlobalConfig
Format ip helper-address <ip-address>
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode Interface Config
Format no ip helper-address {<ip-address>}
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode Interface Config
Format ip helper-address discard
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode Interface Config