Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-55
v1.0, November 2010
no switchport protected (Interface Config)
Use this command to configure a port as unprotected. The groupid parameter identifies the set
of protected ports to which this interface is assigned.
show switchport protected
This command displays the status of all the interfaces, including protected and unprotected
interfaces.
show interfaces switchport
This command displays the status of the interface (protected/unprotected) under the groupid.
Format switchport protected <groupid>
Mode Interface Config
Format no switchport protected <groupid>
Mode Interface Config
Format show switchport protected <groupid>
Mode • Privileged EXEC
• User EXEC
Term Definition
Group ID The number that identifies the protected port group.
Name An optional name of the protected port group. The name can be up to 32 alphanumeric
characters long, including blanks. The default is blank.
List of Physical
Ports
List of ports, which are configured as protected for the group identified with <groupid>. If
no port is configured as protected for this group, this field is blank.
Format show interfaces switchport <unit/slot/port> <groupid>
Mode • Privileged EXEC
• User EXEC