Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-157
v1.0, November 2010
Port Security Commands
This section describes the command you use to configure Port Security on the switch. Port
security, which is also known as port MAC locking, allows you to secure the network by locking
allowable MAC addresses on a port. Packets with a matching source MAC address are forwarded
normally, and all other packets are discarded.
port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config)
.
Format no set mld mcrtexpiretime
Mode • Global Config
• Interface Config
Default disabled
Format set mld querier <address ipv6_address>
Mode • Global Config
Format no set mld querier address
Mode • Global Config
Note: To enable the SNMP trap specific to port security, see “snmp-server enable traps
violation” on page 7-51.
Default disabled
Format port-security
Mode • Global Config
• Interface Config