Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-160
v1.0, November 2010
show port-security
This command displays the port-security settings. If you do not use a parameter, the command
displays the settings for the entire system. Use the optional parameters to display the settings on a
specific interface or on all interfaces.
For each interface, or for the interface you specify, the following information appears:
show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
Format show port-security [{<unit/slot/port> | all}]
Mode Privileged EXEC
Term Definition
Admin Mode Port Locking mode for the entire system. This field displays if you do not supply any
parameters.
Term Definition
Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap
Mode
Whether violation traps are enabled.
Format show port-security dynamic
<unit/slot/port>
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of dynamically locked MAC.