Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-77
v1.0, November 2010
If you use the optional parameter 'detail <unit/slot/port>', the detailed dot1x
configuration for the specified port is displayed.
Control Mode The configured control mode for this port. Possible values are force-unauthorized | force-
authorized | auto | mac-based | authorized | unauthorized.
Operating
Control Mode
The control mode under which this port is operating. Possible values are authorized |
unauthorized.
Reauthenticatio
n Enabled
Indicates whether re-authentication is enabled on this port.
Port Status Indicates whether the port is authorized or unauthorized. Possible values are authorized
| unauthorized.
Term Definition
Port The interface whose configuration is displayed.
Protocol
Version
The protocol version associated with this port. The only possible value is 1,
corresponding to the first version of the dot1x specification.
PAE
Capabilities
The port access entity (PAE) functionality of this port. Possible values are Authenticator
or Supplicant.
Control Mode The configured control mode for this port. Possible values are force-unauthorized | force-
authorized | auto | mac-based.
Authenticator
PAE State
Current state of the authenticator PAE state machine. Possible values are Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized. When MAC-based authentication is enabled
on the port, this parameter is deprecated.
Backend
Authentication
State
Current state of the backend authentication state machine. Possible values are Request,
Response, Success, Fail, Timeout, Idle, and Initialize. When MAC-based authentication
is enabled on the port, this parameter is deprecated.
Quiet Period The timer used by the authenticator state machine on this port to define periods of time in
which it will not attempt to acquire a supplicant. The value is expressed in seconds and
will be in the range 0 and 65535.
Transmit Period The timer used by the authenticator state machine on the specified port to determine
when to send an EAPOL EAP Request/Identity frame to the supplicant. The value is
expressed in seconds and will be in the range of 1 and 65535.
Guest-VLAN ID The guest VLAN identifier configured on the interface.
Term Definition