Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-49
v1.0, November 2010
no snmp-server community ipaddr
This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the
applicable community name.
snmp-server community ipmask
This command sets a client IP mask for an SNMP community. The address is the associated
community SNMP packet sending address and is used along with the client IP address value to
denote a range of IP addresses from which SNMP clients may use that community to access the
device. A value of 255.255.255.255 will allow access from only one station, and will use that
machine's IP address for the client IP address. A value of 0.0.0.0 will allow access from any IP
address. The name is the applicable community name.
no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the
applicable community name. The community name may be up to 16 alphanumeric characters.
Format snmp-server community ipaddr <ipaddr> <name>
Mode Global Config
Format no snmp-server community ipaddr <name>
Mode Global Config
Default 0.0.0.0
Format snmp-server community ipmask <ipmask> <name>
Mode Global Config
Format no snmp-server community ipmask <name>
Mode Global Config