Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-200
v1.0, November 2010
show isdp interface
This command displays ISDP settings for the specified interface.
show isdp entry
This command displays ISDP entries. If the device id is specified, then only entries for that device
are shown.
Device ID The Device ID advertised by this device. The format of this Device ID is characterized by
the value of the Device ID Format object.
Device ID
Format
Capability
Indicates the Device ID format capability of the device.
• serialNumber indicates that the device uses a serial number as the format for its
Device ID.
• macAddress indicates that the device uses a Layer 2 MAC address as the format for
its Device ID.
• other indicates that the device uses its platform-specific format as the format for its
Device ID.
Device ID
Format
Indicates the Device ID format of the device.
• serialNumber indicates that the value is in the form of an ASCII string containing the
device serial number.
• macAddress indicates that the value is in the form of a Layer 2 MAC address.
• other indicates that the value is in the form of a platform specific ASCII string
containing info that identifies the device. For example, ASCII string contains
serialNumber appended/prepended with system name.
Format show isdp interface {all | <unit/slot/port>}
Mode Privileged EXEC
Term Definition
Mode ISDP mode enabled/disabled status for the interface(s).
Format show isdp entry {all | deviceid}
Mode Privileged EXEC
Term Definition