Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-113
v1.0, November 2010
show lacp partner
Use this command to display LACP partner attributes.
The following output parameters are displayed.
show port-channel brief
This command displays the static capability of all port-channel (LAG) interfaces on the device as
well as a summary of individual port-channel interfaces.
For each port-channel the following information is displayed:
Format show lacp partner {<unit/slot/port>|all}
Mode Privileged EXEC
Parameter Description
System Priority The administrative value of priority associated with the Partner’s System ID.
System ID The value representing the administrative value of the Aggregation Port’s protocol
Partner’s System ID.
Admin Key The administrative value of the Key for the protocol Partner.
Port Priority The administrative value of the port priority for the protocol Partner.
Port-ID The administrative value of the port number for the protocol Partner.
Admin State The administrative values of the actor state for the protocol Partner.
Format show port-channel brief
Mode • Privileged EXEC
• User EXEC
Term Definition
Logical
Interface
The unit/slot/port of the logical interface.
Port-channel
Name
The name of port-channel (LAG) interface.
Link-State Shows whether the link is up or down.
Trap Flag Shows whether trap flags are enabled or disabled.
Type Shows whether the port-channel is statically or dynamically maintained.