Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-33
v1.0, November 2010
show users
This command displays the configured user names and their settings. This command is only
available for users with Read/Write privileges. The SNMPv3 fields will only be displayed if
SNMP is available on the system.
show users accounts
This command displays the local user status with respect to user account lockout and password
aging.
Format show users
Mode Privileged EXEC
Term Definition
User Name The name the user enters to login using the serial port, Telnet or Web.
Access Mode Shows whether the user is able to change parameters on the switch (Read/Write) or is
only able to view them (Read Only). As a factory default, the “admin” user has Read/Write
access and the “guest” has Read Only access. There can only be one Read/Write user
and up to five Read Only users.
SNMPv3 Access
Mode
The SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user is able
to set and retrieve parameters on the system. If the value is set to ReadOnly, the
SNMPv3 user is only able to retrieve parameter information. The SNMPv3 access mode
may be different than the CLI and Web access mode.
SNMPv3
Authentication
The authentication protocol to be used for the specified login user.
SNMPv3
Encryption
The encryption protocol to be used for the specified login user.
Format show users accounts
Mode Privileged EXEC
Term Definition
User Name The local user account’s user name.
Privilege The user’s privilege level (1-15).
Password aging The password aging time for the local users.
Lockout Status Indicates whether the user account is locked out (true or false).