Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-96
v1.0, November 2010
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical
unit/slot/port number of a configured port-channel. To clear the port channels, see “clear port-
channel” on page 6-27
.
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The value
range of <key> is 0 to 65535.
no lacp admin key
Use this command to configure the default administrative value of the key for the port-channel.
Format deleteport <logical unit/slot/port> all
Mode Global Config
Default 0x8000
Format lacp admin key <key>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.
Format no lacp admin key
Mode Interface Config