Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-78
v1.0, November 2010
Guest VLAN
Period
The time in seconds for which the authenticator waits before authorizing and placing the
port in the Guest VLAN, if no EAPOL packets are detected on that port.
Supplicant
Timeout
The timer used by the authenticator state machine on this port to timeout the supplicant.
The value is expressed in seconds and will be in the range of 1 and 65535.
Server Timeout The timer used by the authenticator on this port to timeout the authentication server. The
value is expressed in seconds and will be in the range of 1 and 65535.
Maximum
Requests
The maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The value
will be in the range of 1 and 10.
VLAN Id The VLAN assigned to the port by the radius server. This is only valid when the port
control mode is not Mac-based.
VLAN Assigned
Reason
The reason the VLAN identified in the VLAN Idfield has been assigned to the port.
Possible values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not
Assigned. When the VLAN Assigned Reason is ‘Not Assigned’, it means that the port
has not been assigned to any VLAN by dot1x. This only valid when the port control mode
is not MAC-based.
Reauthenticatio
n Period
The timer used by the authenticator state machine on this port to determine when
reauthentication of the supplicant takes place. The value is expressed in seconds and
will be in the range of 1 and 65535.
Reauthenticatio
n Enabled
Indicates if reauthentication is enabled on this port. Possible values are ‘True” or “False”.
Key
Transmission
Enabled
Indicates if the key is transmitted to the supplicant for the specified port. Possible values
are True or False.
Control
Direction
The control direction for the specified port or ports. Possible values are both or in.
Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based
dot1x authentication mode. This value is used only when the port control mode is not
MAC-based.
Unauthenticate
d VLAN ID
Indicates the unauthenticated VLAN configured for this port. This value is valid for the
port only when the port control mode is not MAC-based.
Session
Timeout
Indicates the time for which the given session is valid. The time period in seconds is
returned by the RADIUS server on authentication of the port. This value is valid for the
port only when the port control mode is not MAC-based.
Session
Termination
Action
This value indicates the action to be taken once the session timeout expires. Possible
values are Default, Radius-Request. If the value is Default, the session is terminated the
port goes into unauthorized state. If the value is Radius-Request, then a reauthentication
of the client authenticated on the port is performed. This value is valid for the port only
when the port control mode is not MAC-based.
Term Definition