Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-6
v1.0, November 2010
no network mac-type
This command resets the value of MAC address to its default.
network javamode
This command specifies whether or not the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
no network javamode
This command disallows access to the Java applet in the header frame of the Web interface. When
access is disabled, the user cannot view the Java applet.
show network
This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of
the switch's front panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front panel ports through which traffic is switched
or routed. The network interface is always considered to be up, whether or not any member ports
are up; therefore, the show network command will always show “Interface Status” as “Up”.
Format no network mac-type
Mode Privileged EXEC
Default enabled
Format network javamode
Mode Privileged EXEC
Format no network javamode
Mode Privileged EXEC
Format show network
Modes • Privileged EXEC
• User EXEC