Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-37
v1.0, November 2010
no mac access-group
This command removes a MAC ACL identified by <name> from the interface in a given
direction.
show mac access-lists
This command displays a MAC access list and all of the rules that are defined for the MAC ACL.
Use the [name] parameter to identify a specific MAC ACL to display.
Format mac access-group <name> [vlan <vlan-id>] [in|out] [sequence <1-
4294967295>]
Modes • Global Config
• Interface Config
Format no mac access-group <name> [vlan <vlan-id>] in
Modes • Global Config
• Interface Config
Format show mac access-lists [name]
Mode Privileged EXEC
Term Definition
Rule Number The ordered rule number identifier defined within the MAC ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Source MAC
Address
The source MAC address for this rule.
Destination MAC
Address
The destination MAC address for this rule.
Ethertype The Ethertype keyword or custom value for this rule.
VLAN ID The VLAN identifier value or range for this rule.
COS The COS (802.1p) value for this rule.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The unit/slot/port to which packets matching this rule are copied.