Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-7
v1.0, November 2010
show classofservice dot1p-mapping
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a
specific interface. The <unit/slot/port> parameter is optional and is only valid on
platforms that support independent per-port class of service mappings. If specified, the 802.1p
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed. For more information, see “Voice VLAN Commands” on page 3-50
.
The following information is repeated for each user priority.
show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a specific
interface. The unit/slot/port parameter is optional and is only valid on platforms that support
independent per-port class of service mappings. If specified, the IP Precedence mapping table of
the interface is displayed. If omitted, the most recent global configuration settings are displayed.
The following information is repeated for each user priority.
Format show classofservice dot1p-mapping [<unit/slot/port>]
Mode Privileged EXEC
Term Definition
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user priority value is mapped.
Format show classofservice ip-precedence-mapping [<unit/slot/port>]
Mode Privileged EXEC
Term Definition
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence value is mapped.