Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-112
v1.0, November 2010
port-channel system priority
Use this command to configure port-channel system priority. The valid range of <priority> is 0-
65535.
no port-channel system priority
Use this command to configure the default port-channel system priority value.
show lacp actor
Use this command to display LACP actor attributes.
The following output parameters are displayed.
Default 0x8000
Format port-channel system priority <priority>
Mode Global Config
Format no port-channel system priority
Mode Global Config
Format show lacp actor {<unit/slot/port>|all}
Mode Global Config
Parameter Description
System Priority The system priority assigned to the Aggregation Port.
Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.