Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-28
v1.0, November 2010
If you do not specify the Class Name, this command displays a list of all defined DiffServ classes.
The following fields are displayed:
show diffserv
This command displays the DiffServ General Status Group information, which includes the
current administrative mode setting as well as the current and maximum number of rows in each of
the main DiffServ private MIB tables. This command takes no options.
Match Criteria The Match Criteria fields are only displayed if they have been configured. Not all platforms
support all match criteria values. They are displayed in the order entered by the user. The
fields are evaluated in accordance with the class type. The possible Match Criteria fields
are: Destination IP Address, Destination Layer 4 Port, Destination MAC Address,
Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP
Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and
Source Layer 4 Port.
Values The values of the Match Criteria.
Term Definition
Class Name The name of this class. (Note that the order in which classes are displayed is not
necessarily the same order in which they were created.)
Class Type A class type of ‘all’ means every match criterion defined for the class is evaluated
simultaneously and must all be true to indicate a class match.
Reference Class
Name
The name of an existing DiffServ class whose match conditions are being referenced by
the specified class definition.
Format show diffserv
Mode Privileged EXEC
Term Definition
DiffServ Admin mode The current value of the DiffServ administrative mode.
Class Table Size
Current /Max
The current number of entries (rows) and the maximum allowed entries (rows) in
the Class Table.
Class Rule Table Size
Current /Max
The current number of entries (rows) and the maximum allowed entries (rows) in
the Class Rule Table.
Term Definition