Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Routing Commands 4-20
v1.0, November 2010
show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed.
Virtual LAN Routing Commands
This section describes the commands you use to view and configure VLAN routing and to view
VLAN routing status information.
vlan routing
This command enables routing on a VLAN. The vlanid value has a range from 1 to 4093. The
[interface ID] value has a range from 1 to 128. Typically, you will not supply the interface ID
argument, and the system automatically selects the interface ID. However, if you specify an
interface ID that is already in use, the CLI displays an error message and does not create the
VLAN interface..
no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4093.
Format show ip stats
Modes • Privileged EXEC
• User EXEC
Format vlan routing <vlanid> [interface ID]
Mode VLAN Config
Format no vlan routing <vlanid>
Mode VLAN Config